3/23/2023 0 Comments Rs4000 mguard![]() ![]() The external IP-settings are requested by the mGuard and assigned by an external DHCP server. – Built-in modem / Built-in mobile network modem There are several Router modes, depending on the Internet connection: In Router network mode, a secondary external interface can also be configured (see "Secondary External Interface" on page 152). If NAT is not activated, it is possible that only VPN connections can be used. Only then can the computers in the connected local network access the Internet via the mGuard. NAT should be activated if the mGuard is operated in Router mode and establishes the connection to the Internet (see "Network > NAT" on page 198). This means that the IP address of the mGuard LAN port must be specified as the default gateway address on these computers. If the mGuard is operated in Router mode, it must be set as the default gateway on the locally connected computers. Īs in the other modes, firewall and VPN security functions are available (depending on license). – In Power-over-PCI mode, the LAN port is the LAN socket of the FL MGUARD PCI(E)4000, FL MGUARD PCI(E)4000, FL MGUARD PCI 533/266. – FL MGUARD SMART2 : the LAN port is the Ethernet connector. The mGuard is connected to a local network or a stand-alone computer via its LAN port: – FL MGUARD SMART2 : the WAN port is the Ethernet socket. The mGuard is connected to the Internet or other “external” parts of the LAN via its WAN port. If the mGuard is in Router mode, it acts as the gateway between various subnetworks and has both an external interface (WAN port) and an internal interface (LAN port) with at least one IP address. Here auto MDIX is permanently switched on, so it does not matter if the auto negotiation parameter is disabled.ĭefault setting for TC MGUARD RS4000/RS2000 4G, TC MGUARD RS4000/RS2000 3G, FL MGUARD RS4004/RS2005, FL MGUARD GT/GT, mGuard Centerport (Innominate), FL MGUARD CENTERPORT, FL MGUARD BLADE -Controller, mGuard delta (Innominate) Connect the mGuard s to the DTE interface using an Ethernet crossover cable. The mGuard platforms have DTE interfaces. For a more detailed explanation of the options for using the serial interface (and a built-in modem), see "Modem" on page 186. The details for this must be configured on the General, Dial-out, Dial-in and Modem/Console tabs. For devices with a built-in modem (analog modem or ISDN terminal adapter), the modem can also be used to combine access options. Alternatively, the serial interface can also be used as follows: for PPP dial-in into the local network or for configuration purposes. For devices with a serial interface, the connection to the external network can also or additionally be established via the serial interface using a modem. The WAN port is used to connect to the external network. ![]() The LAN port is connected to a stand-alone computer or the local network (internal). TC MGUARD RS2000 3G, TC MGUARD RS2000 4GįL MGUARD GT/GT, FL MGUARD RS, FL MGUARD PCI 533/266, FL MGUARD BLADE, FL MGUARD DELTA, mGuard Centerport (Innominate), mGuard delta (Innominate)ġSee "Serial console via USB" on page 192. Equipped with the respective VPN licenses, the mGuard rs4000 functions as a remote maintenance infrastructure for the secure connection of machines and plants.The mGuard has the following interfaces with external access: To ensure software-independent remote maintenance scenarios, the mGuard rs4000 can be used as a VPN gateway for IPsec-encrypted VPN tunnels. ![]() Production installations can only be reliably protected through decentralized end-point security from sabotage and resulting production downtimes. The mGuard rs4000 is very well-suited for the decentralized protection of production cells or individual machines against manipulations. The new mGuard factory line offers high-end industrial security in the form of an extremely powerful and fail-safe product portfolio, which is also ideal for sophisticated high-availability scenarios and complex security architectures. Due to its front-side configuration memory (SD card), the mGuard rs4000 can be quickly and easily put into operation, updated and exchanged.Īs successor to the industry standard mGuard industrial rs, the mGuard rs4000 is comparable to this model not only in its space requirements on DIN rails, but also in its functionality. The new fanless industrial security router generation mGuard rs4000 from Innominate's factory line convinces through reliable security and performance in a compact, DIN rail-mountable industrial metal casing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |